The Job logo

What

Where

Biomedical Equipment Technician

Apply

You must Sign In before continuing to the company website to apply.

Smart SummaryPowered by Roshi
Provide technical support to medical equipment users, troubleshoot and maintain equipment onsite at the hospital. Perform measurements, calibration, and preventative maintenance. Ensure equipment meets industry standards and safety regulations. Maintain accurate documentation and perform operational tests.

Job Description

As a Biomedical Equipment Technician, you will be responsible for providing technical support to medical equipment users and managing medical equipment maintenance, calibration, and service onsite at theHospital. You will provide technical support to medical equipment users and troubleshoot to determine the cause of the problem and record results, identify changes in test methods or equipment as needed for medical equipment testing.  As a member of this team, you will take routine sensitivity, selectivity, and accurate measurements of medical equipment, maintain and calibrate medical equipment to industry standards, and perform preventative maintenance on assigned medical equipment.  You will also be responsible for performing safety inspections and initiating any necessary service while also performing various forms of service to general electronic and low-to-medium-risk medical equipment.

Responsibilities

Supports technical activities such as test, check-out, repair and maintain medical equipment. Maintain accurate documentation in database. Ability to work from schematics, diagrams, written and verbal descriptions, of plans to perform testing, checkout and trouble-shooting functions. Perform operational test and electrical safety checks on equipment. Assists in determining methods or actions to remedy malfunctions. Using test equipment to diagnose and repair medical equipment, including, but not limited to, multimeter, electrical safety analyzer and other specialized test apparatus.

Oracle Logo

Company

Oracle

Job Posted

9 months ago

Job Type

Full-time

WorkMode

On-site

Experience Level

3-7 years

Locations

Kansas City, Kansas, United States

Applicants

Be an early applicant

Related Jobs

HCLTech Logo

Technical Consultant - Senior - Packages

HCLTech

Kansas City, Kansas, United States

Posted: 9 months ago

Job description 10 years of Basis Administration experience Hands on experience working on SAP Products like ECC, GTS, PI/PO, SLT, BW, Gateway , Web dispatcher, Fiori Netweaver Java Experience in Solution Manager 7.2 systems Hands on experience working on SAP Upgrades, Refreshes and Migrations Exprience in systems monitoring and performance tuning Experience in working with Oracle database Experience in HANA database and HANA clustering Troubleshooting experience and managing Sev1 and Sev2 incidents SAP LAMA working experience plus SAP ChaRM working experience plus Ability to manage customer and tasks independently Ability to work with Infrastructure team onsite Lead and work with offshore team as required in Projects To analyze ,define and design technical solution for ERP product s enhancement and work towards continuous improvement during product implementation and production support stages To train others and prepare and deliver presentations for knowledge sharing amongst different teams in the project To coordinate with technical teams for pending RICEFs To interact with the client and other functional teams for gaining understanding of the requirements To participate in team meetings Disclaimer HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to secure@hcl.com for investigation.

Cubic Corporation Logo

Technician Lead

Cubic Corporation

Huntsville, Alabama, United States

Posted: 5 months ago

Job Summary:  Performs complex functional, operational, and environmental tests to evaluate performance of military electronic components, assemblies, chassis and systems in accordance with engineering and customer requirements.  This position typically works under general supervision and direction.    Essential Job Duties and Responsibilities: Reads and interprets schematics, logic diagrams and test procedures. Coordinates test failure reporting and corrective actions with Quality Assurance, Reliability Engineering, and immediate supervision. Interfaces with engineering personnel to resolve design and test procedure change issues. Develops and corrects test procedures related to engineering requirements and drawings. Maintains an electronic database related to testing. Diagnoses, locates and troubleshoots malfunctions and repairs on prototype and production equipment. Evaluates and analyzes test data and troubleshoots down to the component level. Works directly with engineers in support of a growing cross functional, multi-disciplined engineering group, working with complex systems at the unit and system level. Performs testing and troubleshooting in lab and field environments following test documentation and engineering instructions. Revises assembly instructions, test instructions and other documentation using MS Office and MS Visio. Works with Engineering, Quality Control, vendors and customers regarding testing and performance issues. Designs, manufactures, tests, documents specialized test jigs and test circuits for use in production and engineering test. Creates test set-ups and runs system-testing, sub-assembly testing and board level troubleshooting while at temperature. Assists Engineering in design, assembly, test and development of prototype electronic assemblies. Prepares and revises test procedures or specifications. Reports status of ongoing test activities to immediate supervisor. Calibrates test equipment. Assembles and disassembles test systems or deliverable equipment using basic hand tools.   Minimum Job Requirements: Two-year degree in electronics or equivalent military/civilian classes, plus a minimum of 5 years of related experience.  Requires thorough familiarity with test equipment.  Must understand the operation of and have experience setting up and using multi-meters, oscilloscopes, signal sources, spectrum and network analyzers and other types of test equipment.  Must have a good working knowledge of RF, analog and microwave circuits. Must be familiar with ISO 9001. Good written and oral communication skills. Ability to follow written and verbal directions prioritize work, complete multiple tasks, work under deadlines, concentrate, and apply craft skills. Must possess an active Secret Clearance. Must have knowledge of and experience in handling cryptographic devices. Must be able to lift 40 lbs ability to walk, stand and sit for extended periods, and climb stairs.

Molex Logo

Manufacturing Technician

Molex

Camarillo, California, United States

Posted: 7 months ago

Your Job Interconnect Systems (ISI), a Molex company, manufactures high performance electronic assemblies in our Camarillo, CA factory.  We currently have an opportunity in our operations department for a Drill/Route programmer and machine operator.  Your skills will make you part of the team that directly impacts the current and future growth for the company.  Our operations use industry accepted process controls in manufacturing and quality to help us maintain and continually improve our excellence in providing electronics solutions to the world markets.    What You Will Do   Program Excellon and Final Touch machines using CAM software and customer data. Set up drill and route machines with proper tools, fixtures, speeds and feeds. Program and operate drill and route machines to drawing requirements and specifications. Troubleshoot and resolve any issues or problems with drill and route machines. Maintain drill and route machines in good working condition by performing preventive maintenance, cleaning and calibration. Maintain work cell to 5S.   Who You Are (Basic Qualifications) Must be able to work in an ITAR compliant facility. Fluent in English writing and communication. Ability to read and interpret data, drawings, specifications and instructions. Excellent problem solving skills. Focus on details, quality and accuracy. Ability to work in a team environment.   What Will Put You Ahead Proficient in programming and operating Excellon and Final Touch or similar machines Experience in AutoCAD and CAM 350 software preferred. Ability to use optical inspection, measurement tools and test equipment. Experience with computers using Microsoft Office programs, Word, Excel, Powerpoint.

Oracle Logo

Software Developer 3

Oracle

Abbeville, Alabama, United States

Posted: 9 months ago

Job Description Design, develop, troubleshoot and debug software programs for databases, applications, tools, networks etc. Responsibilities As a member of the software engineering division, you will assist in defining and developing software for tasks associated with the developing, debugging or designing of software applications or operating systems. Provide technical leadership to other software developers. Specify, design and implement modest changes to existing software architecture to meet changing needs. Qualifications Certain US customer or client-facing roles may be required to comply with applicable requirements, such as immunization and occupational health mandates. Range and benefit information provided in this posting are specific to the United States only Hiring Range: from $74,800 to $178,200 per annum. May be eligible for bonus and equity. Oracle maintains broad salary ranges for its roles in order to account for variations in knowledge, skills, experience, market conditions and locations, as well as reflect Oracle’s differing products, industries and lines of business. Candidates are typically placed into the range based on the preceding factors as well as internal peer equity. Oracle offers a comprehensive benefits package which includes the following: 1. Medical, dental, and vision insurance, including expert medical opinion 2. Short term disability and long term disability 3. Life insurance and AD&D 4. Supplemental life insurance (Employee/Spouse/Child) 5. Health care and dependent care Flexible Spending Accounts 6. Pre-tax commuter and parking benefits 7. 401(k) Savings and Investment Plan with company match 8. Paid time off: Flexible Vacation is provided to all eligible employees assigned to a salaried (non-overtime eligible) position. Accrued Vacation is provided to all other employees eligible for vacation benefits. For employees working at least 35 hours per week, the vacation accrual rate is 13 days annually for the first three years of employment and 18 days annually for subsequent years of employment. Vacation accrual is prorated for employees working between 20 and 34 hours per week. Employees working fewer than 20 hours per week are not eligible for vacation. 9. 11 paid holidays 10. Paid sick leave: 72 hours of paid sick leave upon date of hire. Refreshes each calendar year. Unused balance will carry over each year up to a maximum cap of 112 hours. 11. Paid parental leave 12. Adoption assistance 13. Employee Stock Purchase Plan 14. Financial planning and group legal 15. Voluntary benefits including auto, homeowner and pet insurance