Sr. Staff Hardware Design Engineer, SoC/SIP
Technology, Data & Digital · Software & Web Development · Software Engineering · Embedded Systems
In short
Qualcomm is seeking a Sr. Staff Hardware Design Engineer for its Data Center AI Hardware Engineering team. The role involves designing and developing motherboards, add-in cards, and modules for new AI SoCs/SIPs, collaborating with cross-functional teams from concept to production. This position offers the opportunity to work on cutting-edge AI infrastructure and solve challenging industry problems.
Responsibilities
- Lead schematics design, PCB layouts, design reviews, component selections, mechanical and thermal designs, and develop test plans.
- Co-develop functional specifications for systems, cards, sub-systems, and rack-level architectures.
- Collaborate with internal teams and ODMs to develop and support customer-specific hardware and system requirements.
- Facilitate consensus on technical trade-offs at hardware, software, and chip design levels.
- Support architecture and card designs including accelerator SoCs, memory, I/O, power delivery, electrical/mechanical integration, and PCB definition/design.
- Participate in the design and development of rack-level inference solutions, ensuring alignment with customer requirements and system-level performance goals.
- Resolve architecture and design issues across system, card, and rack levels.
- Assist in the bring-up and debugging of hardware systems, cards, and rack-level configurations.
- Provide technical oversight of factory and manufacturing processes, ensuring quality and consistency across rack-level deployments.
- Contribute to writing Statements of Work (SOWs) and ODM product requirements; drive technical milestones and deliverables.
- Coordinate across multiple development sites, including Qualcomm locations and ODM/JDM partners in Taiwan and internationally.
- Travel to development and customer sites as needed to support rack-level solution deployment and validation.
- Influence and communicate technical recommendations across disciplines and geographic locations.
- Coordinate and deliver technical training for ODMs, with a focus on rack-level system integration and deployment.
Requirements
- Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 6+ years of Hardware Engineering or related work experience.
- OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 5+ years of Hardware Engineering or related work experience.
- OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience.
- System/card/rack-level development, including architecture, design, validation, and deployment of enterprise-class hardware platforms.
- Proven experience in rack-level system integration, including chassis, backplane, cabling, airflow, and thermal management across multiple cards/modules.
- Familiarity with rack-scale power delivery, including PDUs, VRMs, PMICs, and power budgeting across multiple boards.
- Experience with rack-level diagnostics and bring-up, including debug of interconnects, signal integrity across long traces/cables, and system-level validation.
- Understanding of rack-level mechanical constraints, EMI shielding, and compliance with data center deployment standards.
- Collaboration with ODMs/OEMs on rack-level design and manufacturing, including review of mechanical drawings, thermal simulations, and compliance testing.
- Deep knowledge of PCIe cards, motherboards, daughtercards, and backplane signal and power delivery.
- Expertise in chassis design, airflow optimization, and thermal management.
- Solid understanding of system software operation from bootloader to OS and application layers.
- Experience qualifying PMICs, voltage regulators (VRs), clock buffers, flash memory, and connectors for use in complex card and rack-level designs.
- Hands-on experience in dense, high-layer count PCB designs (8–20+ layers).
- Skilled in PCIe add-in card/module design, debugging in high-performance systems (x86 and ARM).
- Familiarity with JTAG tools for bring-up and debug.
- Experience with networking switches and high speed ethernet interfaces.
- Knowledge of high-speed serial I/O (6–10+ Gbps), PCIe Gen5/6, LPDDR4x/5x, DDR4/5, 200/400/800 GbE.
- Experience with long PCB/cable topologies (0.35–1.5 meter), signal integrity, and compliance with current standards.
- Ability to debug at packet/protocol level across link, transport, transaction, and command layers.
- Experience with LPDDR4x memory technologies, DIMM layout and validation.
- Expertise in clock distribution, power distribution, SMBus, PMBus, SPI, PWM/Tach, and BMC integration.
- Proficient in schematic capture and PCB layout tools (Cadence Allegro, Mentor Expedition).
- Experience with circuit simulation tools (SPICE), signal/power integrity analysis.
- Skilled in using lab equipment: oscilloscopes, logic analyzers, JTAG, SMBus, serial debuggers.
- Strong collaboration with ODMs on joint designs, schematic/layout reviews, and compliance to Qualcomm design guidelines.
- Good understanding of x86 FW/SW stack and firmware architecture.
- Experience with BMC hardware/software integration and management.
- Familiarity with regulatory, environmental, and compliance testing for rack-level systems.
Desired Qualifications
- Master's Degree in Electrical and Electronic Engineering, Computer Engineering, or related field.
- 10+ years hardware engineering/Systems development experience or related work experience.
- 4+ years of experience with circuit design (e.g., digital, analog, RF).
- 4+ years of experience utilizing schematic capture and circuit simulation software.
- 4+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, debug tools, etc.
Benefits
- Competitive annual discretionary bonus program
- Opportunity for annual RSU grants
- Highly competitive benefits package designed to support your success at work, at home, and at play
Skills
SoCSIPHardware EngineeringMechanicalThermalSIPTERegulatoryValidationManufacturingSchematicsPCB LayoutComponent SelectionTest PlansFunctional SpecificationsCustomer RequirementsSystem ArchitectureAccelerator SoCsMemoryPower DeliveryElectrical/Mechanical IntegrationPCB DesignRack-Level DesignDebuggingFactory ProcessesStatements of Work (SOWs)Product RequirementsTechnical TrainingSystem IntegrationPCIeLPDDR4x/5xDDR4/5GbESignal IntegrityJTAGLPDDR4xDIMM LayoutClock DistributionPower DistributionSMBusPMBusSPIPWM/TachBMC IntegrationCadence AllegroMentor ExpeditionSPICEOscilloscopesLogic AnalyzersSerial Debuggersx86 FW/SW StackFirmware ArchitectureBMC Hardware/Software IntegrationRegulatory ComplianceEnvironmental TestingApplication-Specific Integrated CircuitBoard Bring-UpCircuit DesignDesign for ManufacturingAssembly LanguageArchitectureC++
#Hardware Design#SoC#SIP#AI#Data Center#Engineering#System Design#PCB Design#Validation#Manufacturing#Electrical Engineering#Computer Engineering
Enabling a world where everyone and everything can be intelligently connected.\n\n
Company
QualcommJob Posted
6 days ago
Employment Type
Full Time
Work mode
On Site
Salary
US$169,800–254,600 / year
Experience Level
Senior
Locations
San Diego, United States of America
Qualification
Bachelor, Master, Doctoral
Applicants
Be an early applicant
Similar Jobs
ABB
Cleveland, United States of AmericaAssociate Demand Field Service Technician
US$42.7–68.3k/yr Full Time Be an early applicant Posted 4 days ago
ABB
United StatesWinder-3-2
Full Time Be an early applicant Posted 4 days ago
ABB
United StatesWinder-3-1
Full Time Be an early applicant Posted 4 days ago
Ericsson
Plano, United StatesAI Velocity Head of Data Foundation and AI Platforms
Full Time Be an early applicant Posted 4 days ago
Alstom
Saint-Bruno, CanadaTrain Electrical Engineer
Full Time Be an early applicant Posted 4 days ago
Sandvik
Troy, United States of America +1 moreTerritory Sales Professional
Full Time Be an early applicant Posted 4 days ago
